clean is not allowed on the disk containing the current boot что делать

Best 2 Ways to Fix «Virtual Disk Service Error Clean Is Not Allowed”

You may get the virtual disk service error clean is not allowed while using diskpart command to clean an HDD/SSD, we will give you the best two ways to fix the problem easily in this article.

By Emily / Last Updated September 26, 2021

The problem: Virtual disk service error clean is not allowed

I have a Windows 8.1 Lenovo Yoga 13 with 128GB hard drive, and I bought an identical 128GB SSD from eBay, which comes with a Windows 8.1 installed and all the partitions. But I want to use it as my secondary storage device and delete everything on the new SSD. But I can’t delete the partition on the new SSD via Disk Management. Then I used diskpart clean command to clean the new SSD drive, I get an error message: virtual disk service error: clean is not allowed on the disk containing the current boot, system, pagefile, crashdump or hibernation volume. I’m not using it as my system disk, why I can’t clean it at all? Can anyone help? Thanks.

The cause: why clean is not allowed on the disk

Generally speaking, you will get this error message when you are using diskpart clean command on system disk. That’s because the system disk contains the Windows operating system files and other critical files, if you are allowed to clean the system disk, all the data and partitions will be gone. That will result in a lot of errors and chaos.

Meanwhile, the delete volume is greyed out in Disk Management. In this case, the new SSD drive may be regarded as the system disk due to the system files, etc. Thus, how to clean the system disk with the right way and get rid of the virtual disk service error clean is not allowed issue? The following content will clear your doubts.

How to fix “diskpart virtual disk service error clean is not allowed” in Windows PC?

Actually, there is a solution to solve this “clean is not allowed on the disk containing the current boot…” problem: delete partitions on system disk under WinPE environment. To achieve that, you can try the following two methods. Choose one based on your needs.

Way 1. Using Windows installation disc to clean

If you have the Windows installation disc, you can follow these steps to solve “clean is not allowed on the disk” issue in Windows 7/8/10/11:

1. Insert the Windows installation disc, then boot from it.

2. Click Repair your computer> Troubleshoot >Advanced Options > Command Prompt.

3. Then input the diskpart commands to clean hard disk:

diskpart

list disk

select disk [disknumber]

clean

Then you could create a new partition on the drive to solve this problem. If the solution is not working for you, you could try the way 2.

Way 2. Force clean the boot disk with a partition manager

If you don’t have a Windows installation disc, the “virtual disk service error clean is not allowed” problem can be solved by third party partition manager like AOMEI Partition Assistant Professional. It is highly recommended by Windows users due to its friendly interface and comprehensive functions. To solve “the clean is not allowed” problem, you could use it to create bootable media, then delete all partitions on the system disk.

Before cleaning the system disk:
1. Install AOMEI Partition Assistant Pro; and the Demo Version is available for free download and a trial.
2. Prepare an empty USB flash drive at least 13GB.
3. If necessary, you can back up system in advance.

Step 1. Create Bootable Media

1. Insert the USB drive and make sure it can be dete cted. Launch the freeware, selectMake Bootable Media at the leftWizards column.

2. Click Next.

3. Tick USB Boot Device to create bootable USB drive.

4. Press Proceed.

Step 2. Delete all partitions on system disk

After creating bootable media, boot computer from the bootable USB stick, then you will see AOMEI Partition Assistant on the desktop. Perform this program and delete all partitions on system disk with these steps:

1. Click the system disk and choose Delete all Partitionsunder Disk Operations column.

2. Choose a proper deletion method, hit OK.

3. Press Apply to confirm to fix the clean is not allowed on the system disk.

Afterwards, create a new partition on the hard drive as the secondary storage device, the virtual disk service error clean is not allowed problem should be solved.

Final Words

Briefly, AOMEI Partition Assistant is a versatile partition management tool. Besides forcing deleting system partition/disk, it is also able to solve the volume is too big for FAT32 issue, convert disk between MBR and GPT without deleting paritions, etc. There are 2 similar errors you could solve use this software: format is not allowed on system partition; delete is not allowed on the current boot, system, pagefile, crashdump, or hibernation volume.

If you are running Windows Server 2019, 2016, 2012, 2008 and 2003, please try AOMEI Partition Assistant Server.

Источник

Я случайно удалил диск с помощью DISKPART

Я пытался исправить мой сломанный USB флэш-накопитель с DISKPART, но я случайно удалил мой диск D (К счастью, это не мой системный диск).

У меня есть полная история команд, что я сделал, но я следовал онлайн-учебник, и я действительно не понимаю, что я сделал. Не могли бы вы помочь мне отменить все, что я только что сделал?

Примечание: первая команда диска списка перед затыкать привод УСБ внутри, вторая команда после подключаю его.

3 ответов

использование команды очистить все на диске, формат которой не может быть отменен.

вы можете попробовать восстановить данные с помощью undelete tools, но это вряд ли вернет все данные.

лучший вариант здесь, чтобы начать восстановление из резервных копий. Я полагаю, вы сделали резервные копии, верно?

просто чтобы немного расширить ответ LPChip, вот что говорят Microsoft:

удаляет форматирование разделов или томов с диска с фокусом. На загрузочной записи (MBR) диска перезаписываются только данные в MBR разделов и скрытых секторах. На дисках таблицы разделов GUID (GPT) информация о разделах GPT, включая защитную MBR, перезаписывается; скрытый сектор отсутствует информация.

указывает, что каждый сектор на диске заполняется нулями, что полностью удаляет все данные, содержащиеся на диске.

Как говорит LPChip, именно поэтому все остальные† делают по крайней мере одну резервную копию своих важных данных каждый день.

_{† в реальности, удручающе, многие нет.}

Так что я, наконец, удалось вернуть его. Я до сих пор не знаю, что именно произошло, но кажется, что это только неназначенная буква диска. В Disk Management я все еще мог видеть свой диск с тем же объемом свободного пространства, что и раньше, но без буквы, поэтому я снова попытался назначить D, и он работает, и все данные кажутся неизмененными.

Источник

Как удалить раздел восстановления в Windows 10?

Мне нужно преобразовать диск, содержащий мою операционную систему, в динамический диск (с базового диска). К сожалению, на диске нет места для преобразования привода из базового в динамический.

Microsoft документирует проблему и отмечает, что решение заключается в удалении последнего раздела на диске:

Недостаточно свободного места для обновления до динамического диска

Запустите диспетчер дисков, щелкните правой кнопкой мыши последний раздел и выберите «Удалить раздел».

Примечание : мне не нужна причина, чтобы задать свой вопрос. Но если кто-то откажется отвечать на вопрос, если я не дам оправдание, то он есть.

Важно отметить, что:

К счастью, мне не нужно ничего резервировать с этого раздела восстановления, так как Windows говорит, что он пуст:

Microsoft говорит, что вы можете использовать диск восстановления для удаления раздела восстановления

По завершении процесса выполните одно из следующих действий:

Некоторые ПК не предлагают возможность удалить раздел восстановления. Если вы испытываете это, на вашем ПК нет раздела восстановления, который бы занимал дополнительное дисковое пространство.

Когда я завершу работу мастера, не будет предложено удалить раздел восстановления:

Что вызывает вопросы:

Проблема, которую я на самом деле пытаюсь решить, заключается в том, как преобразовать диск в динамический (конечно, без переустановки Windows).

DiskPart

Я попытался использовать DiskPart из командной строки с повышенными правами:

На диске достаточно места. Вы получаете эту ошибку по другой причине. Если ваша машина не является настольным компьютером, вы получите ошибку, которая у вас есть.

Вы не можете удалить раздел восстановления, потому что он защищен EFI. Вы должны быть в состоянии заставить с помощью override команды.

Я бы попытался использовать diskpart (из командной строки с повышенными правами), чтобы удалить раздел и преобразовать в динамический диск.

Обычно я переназначаю диски, поэтому я не беспокоюсь о потере данных, а создаю резервную копию ваших данных и использую рабочий стол.

Вариант 1. Удаление раздела восстановления с использованием diskpart:

Вариант 2. Использование стороннего менеджера разделов

Попробуйте что-то вроде EaseUS бесплатный менеджер разделов. Если опция удаления раздела отсутствует в контекстном меню, перейдите к варианту 3.

Вариант 3: использование Disk Manager для сокращения раздела восстановления и объединения дополнительного пространства с основным разделом

Это не дает прямого ответа на вопрос, но предоставляет обходной путь для восстановления пространства, используемого разделом восстановления. Мой занимал 20 ГБ (использовалось только 9 ГБ), и я мог уменьшить его до 415 МБ.

Если вы не можете сжать большую часть размера для восстановления (я мог бы сжать только до 2 ГБ, даже если там более 19 ГБ свободного), вам придется сделать это трудным путем.

Вариант 4: использование Ubuntu для сокращения раздела восстановления и объединения дополнительного пространства с основным разделом. Этот параметр намного длиннее предыдущего. Тебе нужно:

Не забудьте нажать Enter между каждой строкой:

Если установка Windows не найдена, сделайте это (см. Предупреждение ниже):

Если у вас была двойная загрузка, чтобы восстановить Ubuntu Grub, выполните следующие действия.

Вариант 5. Удаление раздела восстановления путем переустановки Windows. Сделайте резервную копию своих файлов, используйте загрузочный USB-накопитель Ubuntu для форматирования и объединения всех разделов, а затем переустановите Windows. Windows создает раздел системных файлов, но это всего лишь 500 МБ (ничто по сравнению с 20 ГБ, которые использовались ранее).

Недостаток (который может быть связан или нет с вариантом 4):

Источник

6 Fixes to DiskPart Virtual Disk Service Error

Summary

Table of Contents:

Overview

What is virtual disk service? According to Microsoft, virtual disk service (VDS) refers to a set of application programming interfaces (APIs) that provide a single interface for managing disks. It offers an end-to-end solution to manage storage hardware and disks as well as create partition on these storage devices. Virtual disk service has two sets of providers to manage storage hardware: the built-in VDS software providers allow you to manage disk space and partition at the OS level, while the hardware providers make it possible to manage hardware RAID arrays. The VDS APIs allow programs to mange disks and partition, thus, you can develop your own software which uses VDS API or make use of programs like Disk Management or diskpart command-line to carry out actions such as create volume, format volume, format volume, assign drive letter, convert basic disk to dynamic disk, etc.

Although we benefit a lot from VDS, sometimes we have to face some issues when using it. Virtual disk service error discussed in this article happens during executing diskpart commands, and it usually appears with a variety of error messages. Once error occurs, the task to be performed cannot be completed. This error can happen when you run diskpart.exe command line to manage your disk and volumes for instance, format disk to FAT32, clean a disk, convert disk between GPT and MBR, etc. In this tutorial, we’ll list some typical errors and provide solutions to help you fix it.

Fix #1: The volume size is too big

When you try to format a local or removable hard drive via diskpart commands you may receive error message «Virtual Disk Service error: The volume size is too big». This error tends to appear when you format a large partition or USB drive to FAT32 file system with diskpart utility. If you try to format the disk or partition in Windows File Explorer, you will be left NTFS and exFAT file system to choose. Here is one of the real-world cases of this problem:

«Hello all, I’ve been trying to format my external hard drive (320GB) to FAT32 so that I can use it under both Windows and Mac. However, there is not FAT32 option when formatting in Windows. Then, I tried to use diskpart to do the job. First, I ran ‘clean all’ to clear the disk and then create a primary partition. Finally, I type ‘format fs=fat32’. It appears the formatting works, but it ended up with error message which says the volume size is too big. My computer is sunning 64-bit version of Windows 10. Is there any other free tool out there that can complete the format? Thanks a lot!»

What is causing the issue?

Windows File Explorer cannot format partition which is larger than 32GB to FAT32 file system, even though it is able to access and use a large FAT32 partition without issue. In this case, users will try to format drive to FAT32 in diskpart, which often ends up with error. This limitation set by Windows is kind of reasonable and understandable, as FAT32 is not the proper choice to manage large disk space. A very large drive formatted in FAT32 might be unstable and tends to encounter issues such as partition corruption. Anyway, if you indeed want to format partition to FAT32, there is an easy solution to complete the task.

Here we recommend to use DiskGenius to format the drive for you. DiskGenius is free disk partition software which enables users to bypass 32G limitation on Windows. The free edition is effective to complete formatting task, and it is capable of formatting partition to NTFS, FAT32, exFAT, EXT4, EXT3 and EXT2. The following section is the formatting process.

Step 1. Install and launch DiskGenius from your Windows computer and you can view the partition you want to format.

Step 2. Right-click on the partition you want to format to FAT32 and select «Format Current Partition» option as below:

Step 3. Select file system from drop-down list and click Format button. Then click Yes button to continue.

DiskGenius performs quick formatting by default, and you can select «Surface Scan» if you want to have a check if the drive contains errors. Once the formatting completes, the NTFS partition will be converted to FAT32 regardless the partition size.

Fix #2: The object is not found

«I was trying to create a new partition on my laptop using diskpart in Command Prompt, as there is not a recovery volume on the computer and I cannot restore Windows. Thus, I attempted to create a partition on my own. I learned steps of creating partition from the Internet. Here are commands I’ve tried: list disk, select disk 0, clean, create partition primary. Then the error ‘Virtual Disk Service Error: the object is not found’«

Did you meet similar problem? Sometimes diskpart just fails to work as expected for some reason. If you fails to create partition via diskpart commands, you can use free third-party software to complete the task.

DiskGenius allows to create new partition from either unallocated disk space or existing partition, so that you can easily create partition via simple steps.

Step 1. Install and launch DiskGenius Free Edition on your computer and locate the disk where you want to create partition.

Step 2. Select unallocated space on the disk and click New Partition button from toolbar. Then the Create New Partition window shows up.

Step 3. Click OK button after setting partition parameters like partition type, file system type, partition size, etc.

Step 4. Click Save All button and format the newly created partition. After that, you can store data to the partition.

Fix #3: Clean is not allowed on the disk containing the current boot, system, pagefile, crashdump or hibernation volume

If you use diskpart clean command to clean system disk, you will receive the error «Virtual Disk Service error: Clean is not allowed on the disk containing the current boot, system, pagefile, crashdump or hibernation volume. » Operating system does not allow to clean the disk when system is running, which means you can clean the disk where Windows is installed when operating system is not running.

If you have a Windows installation disc, you can insert it to computer to let computer boot from the disc. Then select Repair your computer> Troubleshoot > Advanced Options > Command Prompt. After that you can retype diskpart commands to clean system disk.

However, if you do not obtain a Windows installation disc or your computer does not have a CD-ROM device, you can follow steps here to clean hard drive.

Step 1. Launch DiskGenius from your computer and click «Reboot to DiskGenius WinPE Version» from File menu, as picture below.

DiskGenius will prepare to boot to its WinPE version, and you need to wait for a while with patience. Once it is done, you will be asked whether to boot computer immediate. Click OK to continue.

DiskGenius also supports creating Win-PE based bootable USB disk. If you have a USB flash drive, you can have a try.

Step 2. When computer boots to DiskGenius WinPE edition, you can select the system disk, click Disk and choose Delete All Partitions.

This function will delete all partitions and data on the hard drive you’ve selected, and you will suffer data loss if there is a bakcup in advance. If you delete partition or files by mistake, you can perform data recovery or partition recovery to get lost data back with DiskGenius. If you want to permanently remove data, you need to wipe hard drive using Erase Sector function which can be found from Tools menu.

Note: if system partition is cleaned, computer won’t be able to boot normally, and you need to reinstall Windows.

Fix #4: The media is write protected

«I have a 16GB Sandisk USB flash drive 2.0. I bought this USB disk about 3 three years ago and it works well all the time. Today I used it to create a bootable drive with Windows iso tool, which failed due to write-protect error. I’ve tried formatted it in File Explorer and Disk Management, but nothing working. Finally, I tried format fs=fat32 quick in Command Prompt, but still get error ‘Virtual disk service error: the media is write protected’ Does that mean the drive is dead? Do you have any solution to remove the protection.»

Solution 1: Disable write protection in Registry

Step 1. In Windows 10, type regedit in searching box and press Enter key. This will open the Registry Editor.

Step 2. Expand keys on the left pane: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies.

If there is not StorageDevicePolicies on your computer, you need to create one. Right-click on «Control» and select «New» and «Key». Then name it as StorageDevicePolicies

Step 3. Double-click on the WriteProtect value in the right-hand pane. You can now change the Value data from 1 to 0. Then click OK to save the change.

Step 4. Close the Registry Editor and restart computer. Then check if the write protection is removed.

Solution 2: Check and repair bad sectors for the drive

It is necessary to run bad sector checking once a disk cannot be formatted by system, as this indicates the drive cannot be written properly. If a disk cannot be read or written via normal method, it is likely to contain bad sectors. Since it is easy to check bad sectors for hard drive or USB disk with DiskGenius Free, you can have a try when virtual disk service reports the drive cannot be formatted due to write issue.

Step 2. Click Start Verify button from the pop-up window and DiskGenius starts to scan the disk to check if it contains any bad sectors.

DiskGenius marks sectors conditions with colored blocks and bad sectors are tagged with red block (Damaged). If the disk has bad sectors, you can try repairing them after the scanning completed. Note: You should make sure all files on the disk have been backed up before repairing bad sectors.

Fix #5: Disk Management connecting to virtual disk service

Windows Disk Manager Windows does not work as expected and says it is unable to connect to Virtual Disk Service, or «Disk Management could not start Virtual Disk Service (VDS) on (Your Computer Name). This can happen if the remote computer does not support VDS, or if a connection cannot be established because it was blocked by Windows Firewall. For additional information about diagnosing and correcting this problem, see Troubleshooting Disk Management in Disk Management Help.»

The VDS is not supported or cannot be started on this computer.

Solution: Run SFC and DISM

Step 1. Run Command Prompt as administrator. Type SFC /scannow and hit Enter key. The command starts to scan system files, and the scanning process may take some time.

Step 3. Type following commands and press Enter key after each command.

Dism /Online /Cleanup-Image /CheckHealth

Dism /Online /Cleanup-Image /ScanHealth

Dism /Online /Cleanup-Image /RestoreHealth

Step 2. Restart computer after all these commands are executed.

Fix #6: The specified disk is not convertible. CDROMs and DVDs are examples of disks that are not convertible

You are likely to get the «Virtual disk Service error: The specified disk is not convertible. CDROMs and DVDs are examples of disks that are not convertible» error when DiskPart command cannot change the select disk to GPT or MBR format.

In general, two possible reasons behind this error: the disk you want to convert to GPT or MBR is not full of unallocated space, i.e. there is one or more partitions on it; the select disk contains Windows OS.

Solution: Convert disk to GPT/MBR format with DiskGenius Free Edition

The converting between GPT and MBR made by DiskGenius does NOT remove any files on the hard drive. Follow these steps to change disk to GPT.

Tip: If you want to convert GPT to MBR, then choose «Convert to MBR Partition Table».

Step 2. Click «OK» to continue the conversion.

Step 3. Click «Save All» button to save changes to partition table.

Conclusion

To wrap things up, we talked about what is virtual disk service error and provided solutions to fix all kinds of diskpart virtual disk service errors. If you are blocked by the error, try DiskGenius and you will be amazed at how easily to manage disk and partitions, If you have any questions when using the disk partition software, welcome to contact our support team.

Источник