network error connection timed out putty что делать
PuTTY возвращает ошибку сети: время ожидания истекло
Я использую приложение под названием PuTTY для удаленного доступа к серверу.
Я могу использовать его из своей локальной библиотеки и многих других библиотек вокруг меня (а также из Starbucks, Panera и т. Д.), И это работает.
Но я попытался использовать его сегодня из дома моего отца так же, как и раньше, и я получаю ошибку:
Что может быть не так?
Это означает, что PuTTY не может установить соединение с сервером.
Одновременное отключение электричества в моей квартире и в студенческом городке было причиной.
PuTTY подключается к SecureShell.
Да, это, вероятно, маршрутизатор / подключение к Интернету.
Это редко, но некоторые маршрутизаторы высокого класса имеют возможность сбрасывать исходящие соединения.
Я не знаком с Verizon, но, возможно, у них есть какой-то прокси, через который вы подключаетесь к Интернету, и этот прокси не разрешает исходящее соединение.
У меня была похожая проблема на работе. Рабочий прокси блокировал порт 22 (стандартный порт для SSH). Я изменил его на 443, который является портом HTTPS, и это позволило мне подключиться к моему серверу. Чтобы сделать это изменение, вы должны изменить /etc/ssh/sshd_config и изменить порт по умолчанию с 22 на 443, а затем подключиться через него. Но для этого нужно сначала подключиться к серверу, что, на мой взгляд, невозможно. Или вы можете очень быстро запустить ближайшую библиотеку, изменить файл конфигурации SSH для прослушивания порта HTTPS вместо стандартного порта 22 и вернуться домой.
Но я думаю, что вам лучше всего позвонить в службу поддержки Verizon и спросить их об этом.
Putty network error connection timed out [Fixed]
PuTTy being a free and open source terminal application allows system administrator to login to remote server over SSH. This small yet highly stable application is also used to transfer files securely via SCP and SFTP.
If you work in IT or have your own set of servers that need to be connected, PuTTy is not an alien concept to you. However, what can be alien concept is the Putty Fatal error.
The error “Network error: connection refused” is one of the common PuTTY related errors that you may face while working with Putty. The error pops-up when you try to connect to a remote server for the first time or 100 th time.
I have had my fare of share of problems with PuTTy, but most of the time the errors are caused by small but not so obvious issues.
If you are one of those trying to diagnose connection refused error, this article will help you to resolve the error.
In this article, I have listed all the possible solutions to PuTTy connection refused error. Make sure you try each one of them a try until the issue is resolved.
What causes Network error: Connection Refused errors?
The error can occur due to several reasons. Some of them are listed below.
These are some of the common reason for network error: connection refused error in PuTTy. Below are some common solutions that you can try to fix the issue.
How can I fix Network Error: Connection Refused errors?
Fix 1: Contact the system/network administrator
If you are not a system administrator, it is a better idea to start with contacting your system administrator.
System Administrators may change some permissions in router if they notice any unknown device trying to connect or for other security reasons time to time.
If that’s the case, you can easily resolve the issue by contacting the system admin before trying to resolve the issue on your end. While you are at it, you can also tell him about how NetCrunch Tools could help with their daily tasks.
Fix 2: Check if SSH connection is enabled
Depending on the device you are trying to connect, the network error – connection refused error may appear if the device settings has SSH disabled.
For example, if you are using Raspberry Pi to connect through your PC, make sure the ssh is enabled in configuration. Here is how to do it.
In Raspberry Pi, go to Configuration > Interfaces > ssh. Enable the service and try again.
The settings may change depending on the device you are using, but the end result should be a working network connection through PuTTy.
Fix 3: Check if your domain records points to the server
If you are working with a new server and a fresh domain, the error can occur due incorrect DNS server address in the domain settings. All the domain registrar allows you to point your domain to you any third-party hosting provider using the name server.
If you have only installed a server and did not change the name server, you might end up with network error: connection refused error.
To fix the problem, login to your domain name provider and check the name server settings to see if the name servers are pointing to your hosting provider.
Fix 4: Check for Blacklisted and Whitelisted IP Address in the server
Expert Tip: Some PC issues are hard to tackle, especially when it comes to corrupted repositories or missing Windows files. If you are having troubles fixing an error, your system may be partially broken. We recommend installing Restoro, a tool that will scan your machine and identify what the fault is.
Click here to download and start repairing.
For security reasons system administrator may allow connection from only computers with known IP address and that are already whitelisted in the configuration file.
If your ISP IP address has changed or if you are new to the job, you probably need to ask the network admin to make an exception.
The same can also happen if your IP address is blacklisted by the network admin accidentally.
So, check with your network admin for the both the scenarios and see if that can help you resolve the issue.
Fix 5: Disable Firewall
If you are using Windows, your anti-virus or the default Windows Security firewall and network protection feature may block incoming connection resulting in connection refused error.
Try disabling the firewall temporarily to see if that can resolve the connection refused error. If it does, you may need to tweak the firewall setting to fix the error completely.
Disable Firewall in Windows Security
Disable Anti-virus Firewall
If you have a third-party anti-virus program running, you may also need to disable firewall offered by the application. You can disable the firewall from the anti-virus settings option.
Try to connect using PuTTy now. If the connection goes through, you need to tweak Firewall settings to fix the problem.
Other Fixes
If none of the fix worked for you, you can try to restart the SSH server or rebooting the servers.
If your server was setup by someone else, the possibility is that they may have moved the default port as per their convenience. Contact and ask for the configuration nodes to get better idea of the ports.
If you are using a fully managed server, contact support. If the issue is from the hosting provider’s end, the system administrator will fix the issue.
Last but not the least, start using other alternatives to Putty such as other SH terminals can help you in case you encounter an error which is specific to PuTTY.
Conclusion
The Putty Fatal error “Network error: connection refused error can occur due to several reasons and I have tried to list the most common problems and solutions for the same.
However, if the fixes listed in this article don’t work for you, you may ask in forums related to your device or OS on which the error is appearing.
Do let us now if any of the fixes worked for you or if you have a solution that is not listed in the article in the comments below.
Restoro has been downloaded by 0 readers this month.
PuTTY. Fatal Error, Connection Timed Out
Доброго времени суток. Столкнулся с ошибкой Fatal Error, Connection Timed Out.
История болезни.
Имеется рабочий компьютер, который имеет доступ к серверу на CentOS.
Ввиду необходимости работы из дому необходимо получить доступ к серверу по домашнему IP
Для этого в Iptables был разрешен доступ с домашнего IP по tcp по всем необходимым портам.
Из дому настроил Putty путем ввода IP сервера, порта, Auto-login usrname и добавлением ключа SSH. Прочие настройки не трогал.
В итоге получаю ошибке Fatal Error, Connection Timed Out.
К слову сказать, домашний ПК работает через роутер. Промелькнула мысль, что это как-то связано с маской подсети. Но, почитав теорию, сделал вывод, что добавление IP в iptables без маски должно было дать мне доступ без каких либо проблем.
Прошу вашей помощи.
Error: Unable to connect to tcp://pnpu.dyndns-server.com:80. Error: Connection timed out
Добрый день! Скажем у меня есть два сайта и они оба работают в браузере с машины(ос debian,но это.
Ошибка/исключение Socket Error # 10060 Connection timed out
Всем привет. Ребята подскажите пожалуйста, в чём ошибка выхода данной ошибки/исключения. Если.
PuTTY Fatal Error
Здравствуйте! Помогите разобраться пж захожу на сервер через Путти но не могу перезагрузить.
Как исправить ошибку Socket Error # 10060 Connection timed out? при get запросе
Здравствуйте. Появляется такая ошибка на тяжёлых сайтах: procedure.
How to Fix PuTTY Connection Issue Network error: Connection timed out
by Manvendra Deo Singh · Published August 28, 2017 · Updated May 14, 2018
I explained how to installed RedHat Linux on a virtual machine in my last article. I was not able to connect to this Linux server from PuTTY terminal that was installed on my host machine. Everytime i tried to connect to Linux server i got “Network error: Connection timed out“. Here I will explain how to fix this connection issue “Network error: Connection timed out”
Network error: Connection timed out
I faced this issue during making connection to Linux virtual machine from PuTTY terminal that is running on host computer. I got below error during this operation. When i tried to ping the Linux virtual machine from host it was failed and shown request timeout.
I did some research over internet and found lot of solutions and reason behind this issue. Some people suggested to check and disable all firewalls and some has suggested some other solutions. Most of solutions have failed to fix this issue.
I discussed it with one of my friend who works in VMware domain, he suggested only one solution to check the IPs of host and virtual machine that should be part of same subnet. I apply his solution and it worked. Here i will explain the fix of this issue.
Let’s check the IP of local host on which Linux virtual machine is hosted. Run ipconfig command to get these details.
We can see the IP details of the host computer. We can see the range of IP is 192.168.209.1 & subnet mask is 255.255.255.0
Now we will check the IP of the Linux virtual machine which we generally give during the installation. Run ifconfig command on your Linux machine.
You can see the IP of this machine is 192.168.0.1 that belongs to different IP range. This is the main issue behind this error. Our next step to change the IP of Linux machine to same IP range under which host is running.
Solution
The solution of this issue is to change the IP of Linux machine to the same range on which local host is running. We can see the connection interface name is ens33 from above screenshot. Next step is to connect to Linux machine and set the new IP for this connection interface name. Run below command to get this done.
We can see command executed successfully. Now we can validate this change by running ifconfig again and you can see the IP is changed to 192.168.209.10 now.
Now we can go ahead and connect to this machine from host computer. Launch the PuTTY tool and enter the IP of the Linux virtual machine and click on open button as shown in below screen.
Once you click on open button, another window will come and ask you to choose Yes to proceed. Click on Yes button of this screen to proceed. Once you click on Yes button, you will get a login window which ask you to enter a correct login id and password to connect to Linux virtual machine. I did the same and you can see i have successfully connected to the Linux virtual machine from my host computer.
Now issue is fixed and you can do anything as per your requirement on the Linux virtual machine from your host computer using PuTTY terminal.
I hope you like this article. Please follow us on our facebook page and on Twitter handle to get latest updates.
Глава 10: Common error messages
This chapter lists a number of common error messages which PuTTY and its associated tools can produce, and explains what they mean in more detail.
We do not attempt to list all error messages here: there are many which should never occur, and some which should be self-explanatory. If you get an error message which is not listed in this chapter and which you don’t understand, report it to us as a bug (see appendix B) and we will add documentation for it.
10.1 «The server’s host key is not cached in the registry»
This error message occurs when PuTTY connects to a new SSH server. Every server identifies itself by means of a host key; once PuTTY knows the host key for a server, it will be able to detect if a malicious attacker redirects your connection to another machine.
If you see this message, it means that PuTTY has not seen this host key before, and has no way of knowing whether it is correct or not. You should attempt to verify the host key by other means, such as asking the machine’s administrator.
If you see this message and you know that your installation of PuTTY has connected to the same server before, it may have been recently upgraded to SSH protocol version 2. SSH protocols 1 and 2 use separate host keys, so when you first use SSH-2 with a server you have only used SSH-1 with before, you will see this message again. You should verify the correctness of the key as before.
See section 2.2 for more information on host keys.
This message, followed by «The server’s host key does not match the one PuTTY has cached in the registry», means that PuTTY has connected to the SSH server before, knows what its host key should be, but has found a different one.
This may mean that a malicious attacker has replaced your server with a different one, or has redirected your network connection to their own machine. On the other hand, it may simply mean that the administrator of your server has accidentally changed the key while upgrading the SSH software; this shouldn’t happen but it is unfortunately possible.
You should contact your server’s administrator and see whether they expect the host key to have changed. If so, verify the new host key in the same way as you would if it was new.
See section 2.2 for more information on host keys.
10.3 «SSH protocol version 2 required by our configuration but remote only provides (old, insecure) SSH-1»
By default, PuTTY only supports connecting to SSH servers that implement SSH protocol version 2. If you see this message, the server you’re trying to connect to only supports the older SSH-1 protocol.
You might start seeing this message with new versions of PuTTY (from 0.68 onwards) where you didn’t before, because it used to be possible to configure PuTTY to automatically fall back from SSH-2 to SSH-1. This is no longer supported, to prevent the possibility of a downgrade attack.
This occurs when the SSH server does not offer any ciphers which you have configured PuTTY to consider strong enough. By default, PuTTY puts up this warning only for Blowfish, single-DES, and Arcfour encryption.
See section 4.22 for more information on this message.
(There are similar messages for other cryptographic primitives, such as host key algorithms.)
10.5 «Remote side sent disconnect message type 2 (protocol error): «Too many authentication failures for root»»
This message is produced by an OpenSSH (or Sun SSH) server if it receives more failed authentication attempts than it is willing to tolerate.
This can easily happen if you are using Pageant and have a large number of keys loaded into it, since these servers count each offer of a public key as an authentication attempt. This can be worked around by specifying the key that’s required for the authentication in the PuTTY configuration (see section 4.23.8); PuTTY will ignore any other keys Pageant may have, but will ask Pageant to do the authentication, so that you don’t have to type your passphrase.
10.6 «Out of memory»
This occurs when PuTTY tries to allocate more memory than the system can give it. This may happen for genuine reasons: if the computer really has run out of memory, or if you have configured an extremely large number of lines of scrollback in your terminal. PuTTY is not able to recover from running out of memory; it will terminate immediately after giving this error.
However, this error can also occur when memory is not running out at all, because PuTTY receives data in the wrong format. In SSH-2 and also in SFTP, the server sends the length of each message before the message itself; so PuTTY will receive the length, try to allocate space for the message, and then receive the rest of the message. If the length PuTTY receives is garbage, it will try to allocate a ridiculous amount of memory, and will terminate with an «Out of memory» error.
This can happen in SSH-2, if PuTTY and the server have not enabled encryption in the same way (see question A.7.3 in the FAQ).
This can also happen in PSCP or PSFTP, if your login scripts on the server generate output: the client program will be expecting an SFTP message starting with a length, and if it receives some text from your login scripts instead it will try to interpret them as a message length. See question A.7.4 for details of this.
10.7 «Internal error», «Internal fault», «Assertion failed»
Any error beginning with the word «Internal» should never occur. If it does, there is a bug in PuTTY by definition; please see appendix B and report it to us.
Similarly, any error message starting with «Assertion failed» is a bug in PuTTY. Please report it to us, and include the exact text from the error message box.
10.8 «Unable to use key file», «Couldn’t load private key», «Couldn’t load this key»
Various forms of this error are printed in the PuTTY window, or written to the PuTTY Event Log (see section 3.1.3.1) when trying public-key authentication, or given by Pageant when trying to load a private key.
If you see one of these messages, it often indicates that you’ve tried to load a key of an inappropriate type into PuTTY, Plink, PSCP, PSFTP, or Pageant.
You may have tried to load an SSH-2 key in a «foreign» format (OpenSSH or ssh.com ) directly into one of the PuTTY tools, in which case you need to import it into PuTTY’s native format ( *.PPK ) using PuTTYgen – see section 8.2.12.
Alternatively, you may have specified a key that’s inappropriate for the connection you’re making. The SSH-2 and the old SSH-1 protocols require different private key formats, and a SSH-1 key can’t be used for a SSH-2 connection (or vice versa).
10.9 «Server refused our key», «Server refused our public key», «Key refused»
Various forms of this error are printed in the PuTTY window, or written to the PuTTY Event Log (see section 3.1.3.1) when trying public-key authentication.
If you see one of these messages, it means that PuTTY has sent a public key to the server and offered to authenticate with it, and the server has refused to accept authentication. This usually means that the server is not configured to accept this key to authenticate this user.
This is almost certainly not a problem with PuTTY. If you see this type of message, the first thing you should do is check your server configuration carefully. Common errors include having the wrong permissions or ownership set on the public key or the user’s home directory on the server. Also, read the PuTTY Event Log; the server may have sent diagnostic messages explaining exactly what problem it had with your setup.
Section 8.3 has some hints on server-side public key setup.
10.10 «Access denied», «Authentication refused»
Various forms of this error are printed in the PuTTY window, or written to the PuTTY Event Log (see section 3.1.3.1) during authentication.
If you see one of these messages, it means that the server has refused all the forms of authentication PuTTY has tried and it has no further ideas.
It may be worth checking the Event Log for diagnostic messages from the server giving more detail.
This error can be caused by buggy SSH-1 servers that fail to cope with the various strategies we use for camouflaging passwords in transit. Upgrade your server, or use the workarounds described in section 4.28.11 and possibly section 4.28.12.
10.11 «No supported authentication methods available»
This error indicates that PuTTY has run out of ways to authenticate you to an SSH server. This may be because PuTTY has TIS or keyboard-interactive authentication disabled, in which case see section 4.23.4 and section 4.23.5.
10.12 «Incorrect MAC received on packet» or «Incorrect CRC received on packet»
This error occurs when PuTTY decrypts an SSH packet and its checksum is not correct. This probably means something has gone wrong in the encryption or decryption process. It’s difficult to tell from this error message whether the problem is in the client, in the server, or in between.
In particular, if the network is corrupting data at the TCP level, it may only be obvious with cryptographic protocols such as SSH, which explicitly check the integrity of the transferred data and complain loudly if the checks fail. Corruption of protocols without integrity protection (such as HTTP) will manifest in more subtle failures (such as misdisplayed text or images in a web browser) which may not be noticed.
Occasionally this has been caused by server bugs. An example is the bug described at section 4.28.8, although you’re very unlikely to encounter that one these days.
In this context MAC stands for Message Authentication Code. It’s a cryptographic term, and it has nothing at all to do with Ethernet MAC (Media Access Control) addresses, or with the Apple computer.
10.13 «Incoming packet was garbled on decryption»
This error occurs when PuTTY decrypts an SSH packet and the decrypted data makes no sense. This probably means something has gone wrong in the encryption or decryption process. It’s difficult to tell from this error message whether the problem is in the client, in the server, or in between.
If you get this error, one thing you could try would be to fiddle with the setting of «Miscomputes SSH-2 encryption keys» (see section 4.28.10) or «Ignores SSH-2 maximum packet size» (see section 4.28.5) on the Bugs panel.
10.14 «PuTTY X11 proxy: various errors»
This family of errors are reported when PuTTY is doing X forwarding. They are sent back to the X application running on the SSH server, which will usually report the error to the user.
When PuTTY enables X forwarding (see section 3.4) it creates a virtual X display running on the SSH server. This display requires authentication to connect to it (this is how PuTTY prevents other users on your server machine from connecting through the PuTTY proxy to your real X display). PuTTY also sends the server the details it needs to enable clients to connect, and the server should put this mechanism in place automatically, so your X applications should just work.
A common reason why people see one of these messages is because they used SSH to log in as one user (let’s say «fred»), and then used the Unix su command to become another user (typically «root»). The original user, «fred», has access to the X authentication data provided by the SSH server, and can run X applications which are forwarded over the SSH connection. However, the second user («root») does not automatically have the authentication data passed on to it, so attempting to run an X application as that user often fails with this error.
If this happens, it is not a problem with PuTTY. You need to arrange for your X authentication data to be passed from the user you logged in as to the user you used su to become. How you do this depends on your particular system; in fact many modern versions of su do it automatically.
10.15 «Network error: Software caused connection abort»
This is a generic error produced by the Windows network code when it kills an established connection for some reason. For example, it might happen if you pull the network cable out of the back of an Ethernet-connected computer, or if Windows has any other similar reason to believe the entire network has become unreachable.
Windows also generates this error if it has given up on the machine at the other end of the connection ever responding to it. If the network between your client and server goes down and your client then tries to send some data, Windows will make several attempts to send the data and will then give up and kill the connection. In particular, this can occur even if you didn’t type anything, if you are using SSH-2 and PuTTY attempts a key re-exchange. (See section 4.20.2 for more about key re-exchange.)
(It can also occur if you are using keepalives in your connection. Other people have reported that keepalives fix this error for them. See section 4.14.1 for a discussion of the pros and cons of keepalives.)
We are not aware of any reason why this error might occur that would represent a bug in PuTTY. The problem is between you, your Windows system, your network and the remote system.
10.16 «Network error: Connection reset by peer»
This error occurs when the machines at each end of a network connection lose track of the state of the connection between them. For example, you might see it if your SSH server crashes, and manages to reboot fully before you next attempt to send data to it.
However, the most common reason to see this message is if you are connecting through a firewall or a NAT router which has timed the connection out. See question A.7.8 in the FAQ for more details. You may be able to improve the situation by using keepalives; see section 4.14.1 for details on this.
Note that Windows can produce this error in some circumstances without seeing a connection reset from the server, for instance if the connection to the network is lost.
10.17 «Network error: Connection refused»
This error means that the network connection PuTTY tried to make to your server was rejected by the server. Usually this happens because the server does not provide the service which PuTTY is trying to access.
Check that you are connecting with the correct protocol (SSH, Telnet or Rlogin), and check that the port number is correct. If that fails, consult the administrator of your server.
10.18 «Network error: Connection timed out»
This error means that the network connection PuTTY tried to make to your server received no response at all from the server. Usually this happens because the server machine is completely isolated from the network, or because it is turned off.
Check that you have correctly entered the host name or IP address of your server machine. If that fails, consult the administrator of your server.
Unix also generates this error when it tries to send data down a connection and contact with the server has been completely lost during a connection. (There is a delay of minutes before Unix gives up on receiving a reply from the server.) This can occur if you type things into PuTTY while the network is down, but it can also occur if PuTTY decides of its own accord to send data: due to a repeat key exchange in SSH-2 (see section 4.20.2) or due to keepalives (section 4.14.1).
10.19 «Network error: Cannot assign requested address»
This means that the operating system rejected the parameters of the network connection PuTTY tried to make, usually without actually trying to connect to anything, because they were simply invalid.
A common way to provoke this error is to accidentally try to connect to port 0, which is not a valid port number.