the file is too large for the destination file system что делать
4 Methods to Fix File Is Too Large for the Destination File System Error
Ever encountered the “file is too large for the destination file system” error on your system? Don’t worry as you have come to the right place.
Theo Lucia
Nov 10, 2021 • Filed to: Windows Computer Solutions • Proven solutions
If the hard drive on your Windows operating system is formatted with a FAT32 partition, then be ready to face trouble. The «file is too large for the destination file system» is a complicated issue that Windows users have to deal with. The solutions are plenty but implementing them in the right way is also essential. This issue occurs when you will try to move or copy the files larger than 4 GB. To address this problem and give you the solutions, we made the content that can provide significant relief to you. We will let you know about the issue in detail.
What is the ‘file is too large for the destination file system’ error, and why does it happen?
The «file is too large for the destination file system» error is caused due to the FAT32 limitations. If you are well aware of various file systems, then you must have a little idea of their limitations. A file system is a method or structure used by operating systems for identifying and organizing files on the disk. Windows uses the exFAT, FAT32, FAT, and NTFS file system.
All these file systems come with certain limitations. When you format a hard drive with FAT32, it will not let you add an individual file of more than 4 GB. For fixing the errors and transfer files successfully, the only solution is to replace the file system of your hard drive from FAT32 to NTFS. The maximum file size supported by FAT32 is 4 GB, but NTFS can support up to 16 TB. This difference in their limitations results in the «file is too large for the destination file system.»
It can be fixed easily by applying various solutions. It was vital for you to know the reason so that the solutions can be implemented properly. And remember that in any circumstance, this error will not allow you to save files higher than 4GB.
How to fix the file is too large for the destination file system
You can fix the file is too large for the destination file system with the help of these solutions:
Method 1: Compressor Split the big files
When the file size is too large then compress or split it to save it on your USB. This will help in saving it to your USB drive quickly even when it is FAT32 formatted.
Method 2: Converting FAT32 file system to NTFS without data loss
The FAT32 file system is not suitable when you are working with large files. When the file is too large for the destination file system error, convert FAT32 to NTFS file system. For this, there is no need for formatting if you are using the AOMEI Partition Assistant Standard tool. This will convert the file system on your hard drive from one to another. Moreover, it contains a graphical and intuitive interface that will permit you to turn a storage device file system from FAT32 to NTFS quickly. Besides, it is compatible with Windows 10, 8, and other versions. Let us find out what can be done for you.
Step 1: Download and install the tool
Download and install the AOMEI Partition Assistant tool on your PC and right-click on the «FAT32» partition where you want to copy large files. Go to «Advanced» > «Convert to NTFS».
Step 2: Check and select Ok
Click on «Ok» to continue further as shown in the below picture.
Step 3: Convert
Now, just click on «Apply» and «Proceed» to initiate the conversion operation and wait for a few minutes to finish.
Method 3: Format your storage to NTFS file system
Another possible option for fixing the «file is too large for the destination file system», is by formatting your storage to NTFS file system:
1) Format USB drive to NTFS using Windows File Explorer
2) Format USB drive to NTFS using Disk Management
Method 4: Use an alternative storage
We understand that you have stored some crucial information on your USB Drive, which is formatted with the FAT32 file system. Now, if the file is too large for the destination file system issue is interrupting, then use an alternative. Don’t store the data on the current FAT32 formatted USB drive. Move all the data from it to the USB drive or SD card containing the NTFS file system. Also, you can use another alternative, like putting your data on the cloud. This is also an excellent option to go for.
The Bottom Line
We have given you a broad idea on the file is too large for the destination file system along with the solutions. Going through them must have supplied you with all the knowledge needed to solve the error on your own. For more help and guide, stay in touch with us, and don’t forget that the AOMEI Partition Assistant is there for you. This is the best tool that you need for fixing the file is too large for the destination file system. We love this tool a lot as it does not result in any loss of data.
People Also Ask
Why does my USB say the file is too large?
What does too large for the destination file system mean?
Довольно часто каждый пользователь компьютера сталкивается с различными проблемами при записи данных на флешку. Одной из самых частых ошибок является «Файл слишком велик для конечной файловой системы». Вроде бы съемный носитель имеет много свободного места, при этом появляется сообщение об ошибке. Проблема довольно распространённая, однако решается практически в несколько кликов.
Почему появляется ошибка
Каждый съемный носитель имеет свою файловую систему. На данный момент для Windows наиболее актуальными являются FAT и NTFS. Проблема с большими файлами возникает именно в первом случае. Дело в том, что система FAT устарела и имеет ограничение максимального размера файла – 4GB.
Что делать в том случае, если ваш файл занимает, к примеру, более 4GB? Многие могут подумать разделить файл на несколько частей, однако данный способ не совсем корректен. Оптимальным вариантом является изменить файловую систему флэш-накопителя на NTFS. После этого действия сообщение «размер файла слишком велик» больше появляться не будет.
Конвертируем файловую систему в NTFS
Чтобы в будущем не появлялось сообщение «Файл слишком велик для конечной файловой системы» можно один раз сменить формат файловой системы и забыть о проблеме.
Существует несколько способов это сделать
Через форматирование флешки
Важно: при форматировании все файлы с флешки будут удалены.
Открываем Мой компьютер, жмем правой кнопкой мыши по флешке и выбираем «Форматировать…». В новом окне меняем файловую систему на NTFS, а размер кластера (размер единицы распределения) ставим 4096 байт. Далее жмем «Начать».
Через командную строку
Заходим в «Мой компьютер» и смотрим, какую метку (букву) имеет накопитель. Это может быть K,L,M и т.д. Запоминаем букву и открываем командную строку, где прописываем следующую команду:
(в нашем случае метка диска «L»).
Решение проблемы без форматирования накопителя
Если ваша цель – записать файл на накопитель и переместить его на другой компьютер, то в таком случае действительно можно файловую систему не трогать. Как вариант, можно попробовать сжать файл при помощи архиватора. Так как в основном загрузочные образы имеют размер примерно 4,7 GB, то после сжатия они будут занимать примерно 3,5GB, соответственно без проблем скопируются на накопитель.
В единичных случаях можно воспользоваться именно этим способом (для извращенцев). Если вы планируете использовать накопитель для записи объемных образов на постоянной основе, то необходимо форматировать файловую систему в формат NTFS.
Разделение файла на части
Этот способ подойдет владельцем маленьких флешек, и почти не связан с нашей темой.
Чтобы iso образ разделить на несколько частей потребуется архиватор WinRar или похожий.
Первым делом нажимаем на файл ПКМ, после выбираем «Добавить в архив». После откроется всплывающее окно, где потребуется указать дополнительные параметры архивации. Во вкладке «Общие» внизу окна указываем 2000 MB в поле «Разделить тома по размеру», затем нажимаем ОК.
По завершению процесса будет создано 2 файла, которые можно копировать на флешку. Чтобы соединить разделенный образ в единое целое необходимо скопировать файлы с накопителя на другой компьютер, после нажать ПКМ на первую часть образа и выбрать «Извлечь в образ». Через несколько минут появится целый образ в формате iso.
Надеюсь теперь все вопросы, связанные с этой ошибкой, будут закрыты.
Устраняем ошибку «Файл слишком велик для конечной файловой системы»
При переносе информации на внешний жесткий диск или флешку, Windows может выдать уведомление «Файл слишком велик для конечной файловой системы». При этом, ошибка не исчезает, если вновь повторить копирование.
Что означает ошибка
В целом, информация с диалогового окна предоставляется практически исчерпывающая. Трактуется это так – файловая система внешнего носителя информации не поддерживает файлы большого размера. А при копировании, вы превысили допустимый размер одного или нескольких файлов, и система отказывается их копировать на носитель.
При этом, неважно какая операционная система установлена на компьютере – Windows 7 или Windows 10.
Возможные причины
Скорее всего, внешний носитель имеет файловую систему FAT32. В ней имеется ограничение – максимальный размер файла до 4095 Мб. Копируя файл или папку с ним размером больше, чем позволяет FAT32 в англоязычном варианте Windows, вы увидите диалоговое окно «The file is too large for the destination file system».
Способы решения
Есть несколько вариантов решения вопроса. И зависят они от задач, которыми вы руководствуетесь.
Форматирование с FAT32 на NTFS встроенной утилитой Windows(ВИДЕО)
Если данные на флешке не нужны, вам безразлична файловая система, главное, чтобы можно было записать требуемый файл, то можно форматировать FAT32 в NTFS. После этого, подобного ограничения не будет. Что делать:
Преобразование FAT32 в NTFS без потери данных с помощью стороннего программного обеспечения
В случае, если информация с флешки должна остаться на ней, можно воспользоваться для преобразования FAT32 в NTFS бесплатной программой AOMEI Partition Assistant Standard Edition. Как исправить не потеряв данные:
Как записать файл большого размера не потеряв данные
Когда используете внешний накопитель только для переноса информации с компьютера на компьютер, можно разделить большой файл на несколько частей. Считать его при этом не удастся, но файловую систему не нужно будет менять. Данные на внешнем диске затронуты не будут. Сделать это можно с помощью архиватора:
Архив будет состоять из нескольких частей, размер которых не будут превышать максимально допустимое значение.
Ответы на вопросы пользователей
Как добавить фильм на флешку, если телевизор не читает NTFS
В таком случае можно пойти по пути наименьшего сопротивления и скачать в интернете тот же фильм, только меньшего размера. Также, можно преобразовать накопитель в расширенный формат ExFAT. Ограничение при этом составит 32 Гб, что вполне приемлемо. Но такое преобразование сотрет все данные, поэтому предварительно переместите их на другой накопитель информации.
Для форматирования флешки воспользуйтесь командной строкой:
Флешку с ExFAT будут читать телевизоры или иные устройства, которые работают с FAT. И конечно, теперь можно записать фильм большого размера в диапазоне от 4 ГБ до 32 ГБ.
Как записать образ Windows, чтобы сделать загрузочную флешку
Если ISO-образ Windows более 4 ГБ, могут возникнуть проблемы при записи, так как обязательное условие загрузочной флешки — FAT32. Разрешить эту проблему могут специальные утилиты, создающие рабочую загрузочную флешку:
Заключение
В статье собраны способы, которые подойдут для решения практически любой задачи, связанной с этой ошибкой. К сожалению, в силу технических особенностей используемого железа, полностью отказаться от «семейства FAT» пока еще нельзя. Поэтому, сохраняйте мануал в закладки, возможно он еще не раз вам пригодиться.
Fix: The File Is Too Large For The Destination File System
Last Updated on October 4, 2013 by admin 5 Comments
This past Sunday, while transferring a couple of files from my friend’s PC to my USB flash drive, I got an error saying that The file Ubuntu.vdi is too large for the destination file system. My USB flash drive’s capacity is 16GB (actual capacity is 14.9 GB) and the size of the file in question was just 6.87GB.
When I opened up USB drive’s properties to check the available free disk space, I realized that the USB drive was formatted in FAT32 file system and this was the reason for the error.
For those who aren’t aware, you can’t transfer a file larger than 4GB to a drive formatted in FAT32 file system, even if the actual capacity of your drive is more than 4GB. When you try to a transfer a file larger than 4GB in size, Windows shows The file ‘file name’ is too large for the destination file system error.
In simple words, if you have a file named XYZ of size 5GB and want to transfer the file to a drive formatted in FAT32 file system, you need to either split the selected file into two using a file compression software, or format the drive in NTFS file system to be able to transfer the file.
If you’re not sure how to convert a drive from FAT to NTFS file system, you can do so by following the instructions mentioned in one of the two methods.
Step 1: Backup all important files from your USB drive as all data on the drive will be erased while converting the file system.
Step 2: Open up Computer (This PC in Windows 8.1), right-click on the USB drive that you wish to convert to NTFS, and then click Properties.
Step 3: In the Properties dialog box, expand the File system drop-menu, select NTFS as your file system, and then click Start button to begin formatting the drive in NTFS. Once done, you’ll see Format complete message on the screen.
Click OK button when you see the confirmation dialog box.
Method 2: Formatting the drive in NTFS via Command Prompt.
(Use this method is the above mentioned method fails to work)
Step 1: Open Command Prompt as administrator. If you’re on Windows 7, open Start menu, type CMD, and then simultaneously press Ctrl + Shift + Enter keys to run Command Prompt as administrator.
And if you’re on Windows 8 or Windows 8.1, switch to the Start screen, type Command Prompt, and then simultaneously press Ctrl + Shift + Enter keys to open elevated Command Prompt. We suggest you go through our 4 ways to open Command Prompt as administrator in Windows 8.1 guide for detailed instructions.
Step 2: Once the elevated Command Prompt is launched, type the following command and press enter key.
convert X: /fs:ntfs /nosecurity
In the above command, replace “X” with the drive letter of your USB drive.
Once done, you’ll see Conversion complete message. Close the Command Prompt. That’s it!
By Rodin | Follow | Last Updated November 20, 2020
Summary :
When transferring large files to an FAT32 partition, you are likely to see the «file is too large for the destination file system». This is because FAT32 partitions only accept files no more than 4GB. Here MiniTool offers the best way to convert FAT32 to NTFS without data loss.
Quick Navigation :
Failed to Copy/Download a File
I have a large pst file (it has grown to 7 GB).. I am unable to copy this file to an alternate location. I need to take a backup of this file and want to access this file on another computer loaded with Microsoft outlook. Could you please suggest the best way to do this? Many Thanks, Prem
When saving large files to either local hard disk or removable device, you may receive the error “File is too large for destination file system”. If study this code closely, you will find that this problem always occurs on files of which the file sizes are larger than 4GB. In this case, you may wonder what could possibly cause this issue. In this post, we will introduce the reason as well as corresponding solution.
Why File Is too Large for Destination File System
Why «The file system is too large for the destination file system»? To answer this question, we need some basic knowledge about the file systems in Windows at first.
1. What is file system?
File system is the way and structure that operating system used to identify and organize the files on the disk. It is also used to refer to the disk or partition that stores files, or the type of file system. In Windows, the most commonly seen file systems are exFAT, FAT, FAT32, and NTFS. What are their differences?
2. About FAT, FAT32, exFAT and NTFS.
FAT, also known as FAT16, is a simple and robust file system. It does offer good performance but still cannot provides the same performance, scalability and reliability as the later file systems. For FAT, the maximum file size of a single file it supports is 2GB.
FAT32 is a file system suitable for small capacity hard disk. For FAT32, the maximum file size of a single file it supports is 4GB. The advantage of FAT32 is that it has the best compatibility can be applied on many platforms.
exFAT, also known as FAT64, is a file system that introduced in Windows Embedded 5.0 and above (including Windows CE 5.0/6.0, Windows Mobile5/6/6.1) by Microsoft. exFAT was rolled out to fill the gap of FAT32 and is more suitable for flash memory. However, it has bad compatibility and can be recognized by a few OS.
NTFS is the most widely used file system in PC currently. For NTFS, the maximum file size of a single file it supports reach up to 16TB. NTFS is recommended to be applied on large capacity external hard drives.
Today the most popular file systems in Windows are FAT32 and NTFS. Below is a table showing their differences.