unplug charger moisture has been detected что делать
8 Ways to Fix Moisture Detected in Samsung Galaxy S10+ S7 S8 S9+
No matter how much expensive phone you get, these phones are always marred by bugs and issues that can compromise the experience of the user. Same goes for the Samsung Galaxy S7 Edge, S10+, S8+, S9+ and even Note10 Plus users, that has been reported with a number of issues and problems. Among those issues, one of the most important issue being the moisture detection in the charging port of these phones.
Fix Moisture Detected Issue in New Samsung Galaxy Phones
Despite the fact that these phones are water and dust resistant, you might still get bugged by the problems caused by water, every now and then. And the most common issue that is being detected by the users of Samsung Galaxy S7 Edge, S10 Plus, Note 8 and even S9 Plus is the “moisture detected”, that shows the moisture in the charging port of the phones. If so, you need to dry the moisture content and then try to charge your phone, however, if the issue is not being caused by the moisture, the possibility is the error that is triggered by some issue in the firmware.
Check Port: Moisture has been detected in your charging port / charger.
Check Port: Moisture has been detected. To charge your device, make sure your charger/USB port is dry.
Regardless of what triggers the problem, the fact is your phone won’t charge and that, definitely, you don’t want. So, if you are one those users of Samsung Galaxy S series who are facing this error, read on to know how to fix it.
What Causes Moisture in Samsung Galaxy S7 Edge, S10 Plus, Note 8 and S9 Plus
As a matter of fact, the water resistance in the Samsung Galaxy phones is so potent that they don’t allow the water and moisture to enter the internal of the phone and to damage it. However, the exposed areas like the charging port, USB port, and headphone jacks are, still, susceptible to water damage and that is what causes the “Moisture Detected” error in the phones. The wet charging ports can damage the contact points due to corrosion that won’t let the phone to charge and can cause long-term damage to the phone.
Interestingly, most of the users reported that their phones had never been exposed to the water and moisture, still, they face the same error. It happens when you live in the humid area and the moisture in the air affects the charging port of your phone. Moreover, the charging cables can also be blamed for the error. If the charging cable has been exposed to water and moisture, it can be transferred to the charging port of your phone, damaging both, the phone and the port.
8 Ways of Fixing the “Moisture Detected” Error in Samsung Galaxy S7 Edge, S10 Plus, S9 Plus and Note10 Plus
Although there is no setting in the Samsung Galaxy S7 Edge, S10 Plus or S9 Plus phones to fix the moisture detection error, still, there are few things that you can do to fix the error. We have compiled them all so that you can try them all to make your phone functional again.
1: Check your Phone For Possible Water Damage
Of course, the first thing you need to do to fix the “Moisture Detected” error on your phone is to check your phone for the possible liquid damage. To check this, follow the following steps:
If there are some traces of moisture inside the charging port of your phone, the thing you can do is to blow into the port to clean it out. You may also use a cotton swab to absorb all the moisture content present in your charging port. Doing these things will immediately fix the moisture detected error if it is indeed caused by the moisture. Now turn the phone on and try to charge it by connecting the charging cable to see if the solution worked or not.
Avoid blowing hot air inside the charging port because it the worst thing that you can do with your phone. Instead of fixing the problem, it will damage your phone and will cost you more.
2: Turn Off your Phone and Charge
The next easiest and the functional solution that you can do to fix the “moisture detected” error in your phone is to turn it off and then charge. As a matter of fact, you need the battery to find the problem and troubleshoot it, but if your phone has no power left, you will be unable to do anything, but panic. However, this procedure will let you charge your phone while bypassing the warning because the warning typically shows up only when the phone is powered up.
So simply turn off your phone and charge it fully.
3: Restart Your Phone While on Charge
This solution might look weird, however, it has resolved the error for many users. To use this solution, follow the steps.
This time, your phone should charge without any issue. You can repeat the process if you get the error again.
4: Restart Your Phone in Safe Mode
Restarting your phone in the safe mode will help you to charge it because your phone is on the bare bones and will be able to charge, while in the safe mode environment. So, you need to restart your phone in the safe mode to get your phone charged without any issue. For this,
Now you have entered the Safe mode of your phone. Connect the charger and let it charge.
5: Clear Cache of USB Setting
Another working solution to fix the Moisture detected an error on Galaxy S7 Edge, S10 Plus, and S9 Plus is that you clear the USB cache on your Galaxy S devices. To clear cache, follow the steps given below.
Now, the Moisture Detection error would possibly be gone.
6: Make Use of Wireless Charging
Well, this is not a fix, but a way through which you can charge your phone and find the way out for the charging through cable. When you place your phone on the wireless charging pad, the “moisture detected” error won’t show up. This way you will be able to charge your phone and find the possible way to get rid of the actual problem.
7: Clean/Replace your Charging Cable
As mentioned earlier, the charging cable pf your smartphone might be the cause of the error. If your charging cable has been in contact with some sort of water or liquid, make sure to clean it before connecting it to your device. To clean it, use a cotton swab and place it over the metal connector for few seconds so that it can absorb all the moisture present.
If cleaning the wire does not help, try to replace your charger, in order to avoid the long-term damage to your expensive phone.
8: Put Your Phone In Rice Bag or Silica Gel
If you live in such a place, where moisture exists in the atmosphere, you might need to keep your phone inside bag of rice or silica gel (which is normally found under medicine packs). Keep your phone there for around 5 – 6 hours. And this procedure will suck all the moisture present inside your phone’s charging port or anywhere else. Now you will not be facing moisture detected issue on your Samsung Galaxy S7 | S7 Edge | Note 8 | S10+ | S9+ smartphones.
Отключите зарядное устройство. Обнаружена влага. Решение проблемы. Unplug Charger MOISTURE Detected
Уведомление Обнаружена влага как исправить часть 2 ответы на вопросыПодробнее
«Обнаружена влага» на устройстве Samsung. Как избавиться от сообщения?Подробнее
В разъёме USB обнаружена влага Samsung Galaxy A SM-T595Подробнее
обнаружена влага samsung, android, влага на зарядном порте, USB порте, разъеме зарядкиПодробнее
Уведомление Samsung Обнаружена влага как исправитьПодробнее
samsung note8 note10 не заряжается. обнаружена влага на гнезде.Подробнее
Чистка Type-C разъема Samsung обнаружена влага!Подробнее
Обнаружена влага в usb порту, type-C. Как почистить гнездо зарядки. Не работает зарядка в телефонеПодробнее
Вскрытие Оригинальной Зарядки Samsung ETA-U90EПодробнее
Galaxy S8, S9, S10 Влага обнаружена в порту зарядки: 6 решенийПодробнее
Samsung Note 9 N960F не заряжаетсяПодробнее
Samsung G950 не заряжается. Значки треугольника и капли. РЕШЕНО. Подробнее
Решения Fix-8 для обнаружения влаги в Galaxy S10Подробнее
SAMSUNG GALAXY S10E SM-G970F/DS not charging, water inside / не заряжается, попала водаПодробнее
2021 РЕМОНТ Отключите зарядное устройство Обнаружена ВЛАГА Подождите, пока оба порта USB не высохнут ТЕЛЕФОН S8 Samsung GalaxyПодробнее
If you see a liquid-detection alert on your iPhone
When you connect a Lightning cable or an accessory to your iPhone XS, iPhone XS Max, iPhone XR, or later, your iPhone can warn you if there’s liquid in the Lightning port.
If you see one of these alerts, your iPhone has detected liquid in the Lightning port or on the Lightning cable or Lightning accessory. To protect your iPhone and the accessory, charging and accessory connection are unavailable until the Lightning port and the accessory are dry.
Charging not available: Appears if you connect your iPhone to a charger and liquid is detected.
Liquid detected in Lightning Connector: Appears if you connect an accessory to your iPhone that doesn’t charge your iPhone and liquid is detected.
If you charge your iPhone while the Lightning port is wet, the pins on the Lightning port or the cable can corrode and cause permanent damage or stop functioning, causing connectivity issues for your iPhone or accessory.
Although you shouldn’t charge your iPhone when it’s wet, you might need to in an emergency. If you reconnect your iPhone to the Lightning cable or accessory, you have the option in an emergency to override the liquid detection and charge your iPhone.
If you have a wireless charger, you can still use that to charge your iPhone. For best results, make sure that the back of your iPhone is dry before you place it on your Qi-certified charger. Learn more about wirelessly charging your iPhone.
If your iPhone or Lightning accessory is wet
Unplug all cables or accessories. Don’t plug them in again until they’re completely dry.
To dry your iPhone:
Here are a few things not to do:
If your iPhone and Lightning accessory aren’t wet
If you see this alert every time you connect a certain cable or accessory, that cable or accessory might be damaged. Contact the manufacturer.
If you see this alert every time you connect an Apple Lightning cable or accessory, contact Apple Support.
Fix Moisture Detected Error on Samsung Devices
If you own a Samsung Galaxy S, A, and Note Series device and are getting the ‘moisture detected in USB port‘ error, you can fix it easily. Almost all high-end Samsung smartphones come with an IP68 rating. Moisture detection sensor on such devices is a safeguard to protect them against short-circuiting. In case you are getting the ‘Moisture detected in charging port’ message on your phone, there are many things you can do to make it go away. You can even disable the moisture detected feature on Samsung devices via battery settings.
Apart from performing manual diagnostics of your Samsung Galaxy device, you can get key info about it using these Samsung secret codes.
Below is a list of all Samsung smartphones and tablet devices that are backed by the rating of IP68. It means that these devices can withstand dust, and are resistant to water submersion up to 1.5 meters for up to 30 minutes.
Note: Samsung Galaxy S10 5G has an IP69 rating while the Galaxy Fold and Z Flip have no IP rating.
The Galaxy S7 and S7 Edge were the first Samsung phones featuring IP68 rating. I have owned the Galaxy S7 Edge, Galaxy S8 Plus, Galaxy S9 Plus, Galaxy S10 in the past, and am currently using the Note 10 Plus. I was bugged by the moisture-detected warning on all the above phones. Depending on your device model, you may get one of the following messages.
Moisture detected in USB port. Remove the cable immediately from the phone and make sure both cable and USB port is completely dry.
Moisture has been detected. Unplug the charger and wait until both the charger and USB port are dry.
Moisture has been detected in your charger/USB port. Make sure it’s dry before charging your phone. It may take some time to dry completely.
On newer Samsung phones such as Galaxy S10, Note 10, and Galaxy S20, you’ll also find some tips to fix the ‘Moisture has been detected‘ issue. As long as your phone detects moisture, you’ll see a water drop icon in the status bar and a notification from Android System.
Moisture has been detected on Samsung Note 10+
Is Moisture Detection on Samsung an Error?
If your Samsung phone is rated with Ingress Protection or IP68, it means that the OEM has made use of adhesives, gaskets, and seals to make sure moisture or water drops don’t go inside the device. Even the speakers in such devices are fitted with mesh grilles.
Now, we all know about the dangerous enmity between water and electricity. If the charging port on your Samsung Galaxy device is wet or humid, it might cause a short-circuit, damage the device and make it unfunctional.
The point is, the moisture detected message is not actually an error but a safety measure to protect your Samsung phone. The moisture detection sensor intelligently stops the device from charging automatically as soon as it detects moisture in the charging port or the USB cable.
If you are getting the “Moisture has been detected” warning, it’s doesn’t mean that your Samsung phone was in direct contact with water. Most of the time, the charging error might be caused by a very humid atmosphere and sweating, especially if you live in a hot and humid area. The presence of dirt in the USB port of your Samsung device might also cause charging issues. Many users have reported getting the moisture-detected warning when the charging port gets dirty.
If you are having problems with charging your Samsung Galaxy smartphone or tablet, it may be due to one of the following reasons:
Fixing Moisture Detected Error on Samsung
So, what do you do when your phone says moisture has been detected? Below, are some easy fixes to get rid of the annoying moisture detected warning notification if your Samsung phone has recently been exposed to moisture.
What to do if the Charging Port is Damaged?
If you think that the charging port of your Galaxy device is bone dry and clean, there may be some hardware-related issue either with the USB port, moisture detection sensor, or the USB Type C charging pin.
How to Disable Moisture Detected Error
If the moisture detected error won’t go away even after cleaning and wiping the USB port, and you are still unable to charge your Samsung device, try the following things.
Disable Fast charging on Samsung devices
galaxy s21 sign out of samsung account
I hope that the fixes described above would have helped you get rid of the moisture detected error on your Samsung device. However, if are getting the issue even after trying everything, contacting Samsung support or visiting the service center is your last resort as there may be some hardware-related problem at play.
Fix Moisture Detected Error on Samsung Galaxy S7/S8/S9/Note 9
Most high-end phones come with IP certification and claim to be water and dust proof/resistant. The Samsung Galaxy S7, S8, S9, and Note 9 also come with IP68 (6 is for dust and 8 is for water). Moisture detected or “moisture has been detected” error in charging port is one of the commonest issues the users of Samsung Galaxy S7, Galaxy S8, Galaxy S9 and Note 9 encounter at some point of time. Here’s how you can fix moisture detected error on Samsung or non-Samsung devices. When you have this error, you’ll see a warning message pop up and a water-drop icon on the status bar. The warning shows up when you plug in the charging pin to the Samsung device and it refuses to charge, saying:
Moisture has been detected. Unplug the charger and wait until both the charger and USB port are dry.
One of the things that modern smartphone manufacturers use as a unique selling point for their high-end devices is adding the “waterproof” feature to them. Everybody wants to have a phone that doesn’t refuse to function properly or dies forever if it comes into contact with water accidentally. In fact, people want to own a phone that allows them to shoot underwater pics.
Sony has been making waterproof devices, especially the Xperia Z series, for years. Personally, I have stopped relying on the waterproof technology used in modern smartphones since my Xperia Z3 made its way to the world of the dead shortly after I dipped it into a bucket of water to test Sony’s claim that the Z3 is waterproof. It happened the same day I purchased the device, and by refusing to replace or repair my new phone, the service center added more salt to my wound. I used to have the Galaxy S6 Edge, S7 Edge, and the S8 Plus in the past and currently, have the S9 Plus, but never did I gather the guts to test any of them.
Actually, water is the biggest enemy of electronic gadgets and making a phone that can survive inside water, even to a certain duration and pressure, is not an easy job. Since it’s impossible to imagine a smartphone without stereo speakers, microphone, earphone pin socket and charging port, it’s also hard to imagine a phone with no holes.
With the launch of the Galaxy S7/S7 Edge, Samsung brought the IP68 certification to their flagship range. It means that these devices can withstand water pressure up to 1.5 meters for a duration of 30 minutes. The Galaxy S8, Galaxy S9 and Note 9 are also water and dust proof.
Samsung has made heavy use of gaskets, sticky adhesives, and seals on the Galaxy S7/S7 Edge, Galaxy S8/S8 Plus, Galaxy S9/S9 Plus and Note 9 to protect the internal components from letting water or moisture inside the device. As for the speakers, Samsung has fitted mesh grille for keeping water out. To save the device from a possible short-circuit the power jack on the Galaxy devices are powered by software that gives it the signal to stop responding.
Maintaining Water and Dust Resistance
Now here’re some instructions from Samsung as mentioned in the device manual. Follow these tips to maintain the water and dust resistance of your Samsung and other Android devices.
Samsung claims to make heavy use of gaskets, sticky adhesives and seals to protect the internal components from letting water or moisture inside the device. As for the speakers, Samsung has fitted mesh grille for keeping water out. To save the device from a possible short-circuit the power jack on the Galaxy S7/S8/S9/Note 9 are powered by software that gives it the intelligence to stop responding to an electrical connection when the charging pin is plugged in.
Having read the above details, any Galaxy S7/S8/S9/ Galaxy Note 9 users might start dreaming about some underwater adventure but then, there’s a problem. The device might stop charging if it detects any kind of moisture inside because of the moisture-detecting stickers fitted in the device. Moreover, Samsung has applied no water repellant coating on the circuit boards and that make this device more vulnerable to short-circuiting and corrosion.
The Samsung Galaxy S7/S8/S9 is water resistant and it’s really an ensuring safety feature against accidental exposure to water. However, if you become very enthusiastic about it and deliberately try to expose it to water, Samsung might refuse your claims and you might lose your hands off the device warranty.
What is Moisture Detected in Charging Port Error?
If you have recently exposed your Samsung Galaxy S7, Galaxy S8, Galaxy S9 or Note 9 to water and have been encountering “Moisture has been detected” error when you try to charge it, below are a few tips that you should try to fix the issue.
The error pops up, especially when the sensor detects any moisture inside the charging port. As I said above, this is a safety measure by the OEM to protect the device from short-circuiting. To some, it might sound like a sensible safeguard, while for some it might be the point that defeats IP68 certification.
Anyway, given below are a few handy tips to get the moisture out of your device and fix the Moisture Detected Error issue on Samsung Galaxy phones.
Tips to Fix Moisture Detected Error
Try these things to solve the moisture detected or moisture has been detected error on Samsung devices:
Having tried the things suggested above, reboot your Galaxy S7/S7 Edge/S8/S9/Note 9 and plug in the charger pin. You should now able to charge the device normally.
Do share with us which tip worked for you. If you have tried something else that fixed the “moisture detected on charging port” or “moisture has been detected” error on your Samsung Galaxy device, please share with us via comments. It’ll help others.