you are using an outdated version of kernel please update что делать

13.07.202214.07.2022 admin 0 Comments

Ошибка GLFW 65543 из-за которой вы не можете запустить игру решается достаточно легко. Обычно эта ошибка бывает на старых моделях видеокарт или из-за старого видеодрайвера. Так что-же делать? Давайте разберемся!

Начиная с 1.17 игра начинает требовать с видеокарты OpenGL 3.1+. Однако ошибка может быть и на версиях старее. Если у тебя данная проблема, то заходи сюда. Здесь тебе обязательно помогут!

Сначала обновим версию Java.

Отлично! Теперь загрузите и установите Java 8 здесь или Java 16 (для майнкрафт 1.17+) здесь по гайду, проверьте, что ваш лаунчер использует именно эту, новую версию джавы.

Теперь нужно переустановить драйвер видеокарты.

Так как за OpenGL отвечает видеокарта. Как?

1. нажмите WIN + R, введите devmgmt.msc

2. Откройте вкладку ВИДЕОАДАПТЕРЫ. Тут вы найдете модель вашей видеокарты, у меня их 2, основная GTX 1080TI и встроенная в процессор Intel 4600.

3. Зайдите на сайт вашей видеокарты.
NVIDIA / AMD / Intel Graphics

4. Найдите драйвер для своей видеокарты и загрузите его.

5. Пока загружается ничего не трогайте.

6. В Диспетчере устройств нажмите ПКМ по вашей видеокарте и нажмите Удалить Устройство. В окошке возле Удалить программы драйверов для этого устройства поставьте галочку.

6.1 Желательно перезагрузиться.

7. Откройте файл который мы скачали, и следуя инструкциям установщика установите драйвер.

Готово! Теперь необходимо перезагрузить компьютер.

Скопируйте его сюда: С:\Program Filles\Java\jre_

Как я понял, файл для Java 8. Однако можно попробовать на Java 16.

для Java 16 скопируйте сюда:

Спасибо за прочтение, надеюсь помог. Пиши в комментариях если не помогло, помогу там.

Нужно полностью удалить драйвер видеокарты, для этого следуйте инструкции:

1. Загрузите программу здесь. Программа бесплатная.

1.1. Если вы еще не скачали драйвер, то сделайте это сейчас. Ссылки были выше.

2. Загрузитесь в безопасном режиме. Как?

2.1 WIN + R, вводим msconfig.

2.3 Откройте вкладку загрузка.

2.4.Найдите галочку возле БЕЗОПАСНЫЙ РЕЖИМ.

2.5. Поставьте галочку, нажмите применить. Перезагрузитесь. В этом режиме не запускаются некоторые службы, программы, а главное у нас есть возможность удалить видеодрайвер.

2.6. После перезагрузки снова откройте msconfig и уберите галочку возле БЕЗОПАСНЫЙ РЕЖИМ.

2.7. Распакуйте архив и откройте программу.

2.8. Делайте по скриншоту ниже.

3.. Если все хорошо, то уже в нормальной системе (не в безопасном режиме) отключите интернет и откройте скачанный файл с драйвером. Экран до установки драйвера может быть разплющенным, и мыльным. Это нормально. Во время установки экран может мигать!

Источник

0 Before you do anything about Krnl check that you have the requirements.

Krnl needs these programs/software to function properly

To check that you have Windows 10 and it’s 64bit

Use your eyeballs and 4 braincells to visually inspect the desktop environment, icons, start menu then compare them to images/screenshots online.

Type 64bit into the search bar in Windows 10. It should pop up with a suggestion saying «Is my PC 32bit or 64bit».

To check that you have the VC Redists

Go to the «Add or remove programs» section in the Windows 10 settings.

Then search for Visual C++ Redistributable.

If two programs named along the lines of Visual 2015-2019 x64 and x86 show up that means you have it.

Run the main krnl executable file

Click yes if prompted.

To check that the webclient version of Roblox is installed/install it.

Uninstall the Microsoft Store version of Roblox if you have it

Install the web version from the roblox website. Link is in the Requirements above

1 Issues about downloading/opening krnl:

1.1 Download blocked by browser

Press the key combination CTRL + J

It should take you to the downloads section of your browser.

From there click on «Allow malicious file».

But don’t be scared Krnl is completely safe. «But then why does my antivirus and browser say it is» you may ask. The answer to this question is explained in detail in the next part.

1.2 Antivirus blocking downloading/running Krnl

Why this happens

But heres the catch: Dll injection isnt just used by game cheats. They are also used by malware. Due to this antivirus try to quarantine/delete all dll injectors they detect without actually knowing what if they are safe or not. You will usually see antivirus calling most exploits including krnl a Cryptinject.msr trojan because of this.

Please keep in mind that this isnt the exact source code as the Asyncronous Functions wont be fully decompiled in dnSpy. However it should still give you a good idea of if Krnl is safe or not.

SKIP THIS STEP IF YOU DONT HAVE A 3RD PARTY ANTIVIRUS

To fix this issue you must uninstall any 3rd party antivirus from your system. Such as McAfee, Norton, Eset, Kaspersky etc. Sorry but there isnt another way of solving this issue. From my and many users experiences excluding/disabling 3rd party antivirus is terrible and doesnt yield consistent/reliable results.

Once that you have uninstalled your 3rd party antivirus and rebooted your pc (Or you didnt have any to begin with). Its time to exclude Krnl from Windows Defender which is the default antivirus that comes with Windows 10. To do this we recommend watching a tutorial from YouTube. But in short all you need to do is:

1.3 Bootstrapper/Downloader issues

If the official Krnl bootstrapper from krnl.gg doesnt work for you for any reason even after you excluded it from Windows Defender here are some things you can try:

Making sure you have all the requirements listed on the top of this guide

Making sure you dont have any 3rd party

antiviruses such as Avast, McAfee, AVG etc.

Making sure it isnt blocked by Windows Defender

Running it as administrator

Making sure its in a folder

If you have done all of this but you still cant see krnlss.exe or krnl.dll in the Krnl folder, bootstrapper getting stuck at krnlss.exe.config etc.
You can try downloading krnl by other means such as:

Downloading from wearedevs.net

Downloading from the pinned messages of their discord server

First way: Download from wearedevs.net

All you need to do to use this version of Krnl is:

Download the rar/zip file.

Extract to a folder excluded from Windows Defender.

Open krnlss.exe located inside it.

Then you can disregard any warning that says «Roblox version is incorrect» as its not an issue.

Second way: Downloading and extracting the Krnl zip/rar version from their discord server.

2- Issues about injecting/executing:

2.1 Unknown error/crashing when injecting

You might sometimes find yourself in this error box when you try to inject Krnl.

Before we try any solutions though check that you have the requirements to run Krnl (Located at the top of this guide)

If you have the requirements but you are still getting an error you can try these steps:

Reinstall/Repair VC Redist x64/x86 2015-2019

Make sure you have the latest version of Krnl

Make sure any antiviruses aren’t running and you excluded Krnl from windows defender

2.2 Krnl is getting stuck at saying «Injecting»

To solve this issue you need to use a 3rd party injector such as Extreme Injector or the built-in dll injection functionality of other software such as Process Hacker.

We recommend watching a YouTube tutorial on how to do this. Heres a link to one made by me Click here But here’s a quick rundown of the basic steps involved.

After injecting all you need to do is getting a key. How to do this can be found in step 3. After you enter your key in it and press enter. It should automatically close the console window and the «Inject» button in the Krnl UI should turn into «Injected»

2.3 Roblox Process not found error

This is caused by the fact that the Microsoft Store version of krnl isnt injectable. You have to use the Roblox version from their own website to use Krnl. Install roblox from https://www.roblox.com/download to fix this issue.

2.4 krnl.dll missing issue

2.5 Executing crashes Roblox

This issue is caused by

The script you are trying to use contains invalid lua code

The script you are trying to use is patched

The script you are trying to use is not supported in Krnl

TLDR: Find a different script

2.6 Stuck at waiting for roblox

2.7 You are using an outdated version of Krnl

3- Issues about keys

First let’s talk about how to get a key in the first place and how they work.

Krnl Keys are based on your IP. This means that:

You cannot share your keys with others

If you decide to use a VPN when using Krnl it has to be a desktop VPN and not a browser extension VPN.

Your key will be invalidated if your ip changes (meaning if you turn your pc off for an extended period of time or reboot your router your key will get invalidated)

To get a key you must go to the URL that is given to you in the console popup window after you inject krnl.

After you go to it for the first time you should be redirected to a linkvertise link. If you get prompted to do a survey just click on the x. Then click on free access with ads. Do the tasks and move onto the next link. Now do this 4 more times. And you will finally be directed to the keypage where you can copy your key and paste it into the console window from before then press enter.

It should check your key for a few seconds then the console window should disappear and krnl should be injected.

3.1 Key invalid

If you are using a vpn try disabling it and getting a new key.

If you aren’t using a vpn however your IP might be changing too often.

Try clearing your browser cookies

3.2 Stuck at checking key

This issue is actually the stuck at waiting for Roblox issue but camouflaged. Its caused by one of the hooks that are made by Krnl at injection overwritten by another application eg. Msi Afterburner.

To fix this close all apps running in the background (Check the system app tray!) and reopen Roblox then try injecting Krnl again.

4 Miscellaneous Issues

«Send «error.txt» to the krnl server»

Here are some common fixes for this issue

Make sure you have the latest version of Krnl from krnl.gg

Make sure you have read and did as said in part 1.2 of this FAQ, then rerun the bootstrapper

Источник

How To Fix Krnl Outdated

**crouton on x86_64 and arm, kernel version issue with libc updating in chroot #4429**

Comments

clrmntn42 commented Mar 5, 2021

I’m having an issue updating my crouton installs.

They fail at updating libc with this error:

ERROR: Your kernel version indicates a revision number
of 255 or greater. Glibc has a number of built in
assumptions that this revision number is less than 255.
If you’ve built your own kernel, please make sure that any
custom version numbers are appended to the upstream

I realize this is not a crouton script issue, but an issue with the chrome os version number.

Does anyone know of a way to work around this?

Been stuck with this issue for a while, so I’d thought I’d ask here.

Any help appreciated!

Linux localhost 4.4.257-19930-ga3a8dfd6a994 #1 SMP PREEMPT Wed Mar 3 21:02:41 PST 2021 aarch64 GNU/Linux

kernel number with a dash or some other delimiter.

Please describe your issue:

If known, describe the steps to reproduce the issue:

The text was updated successfully, but these errors were encountered:

DennisLfromGA commented Apr 13, 2021

I believe it’s outdated distros and there may not be anything that can be done. 🤔

brendangregg commented May 5, 2021

I hit the same issue, same kernel version. A 255 revision limit rings a bell. it’s sound like the LINUX_VERSION_CODE encoding, which packs the kernel version in a uint32. It is generated by /usr/include/linux/version.h

So 257 overflows and makes this kernel 4.5.1. glibc needs a different packing scheme.

brendangregg commented May 5, 2021

@clrmntn42 can you please change the ticket description and delete «arm»? This also affects x86_64. Maybe the summary should be «crouton fails on newer kernels (e.g., 4.4.257)».

brendangregg commented May 5, 2021

Ctrl-Z after it retrieves libc, to leave the installer paused.

Open a new terminal tab, and:

There you’ll find the libc6 package. E.g., libc6_2.23-0ubuntu3_amd64.deb

It’s the «-ge 255» line. I changed it from 255 to something much bigger (999). Then repackaged the deb, and copied it back to the location on the chrome book. This is switching out the deb package file while the installer is paused.

fg to continue the crouton installer, and it picks up the modified libc6.

Then it crashes with the same error! But this is later in the install sequence, and this time it’s a slightly different libc6 version (libc6_2.23-0ubuntu11.2_amd64.deb). You’ll find it in this directory, or something similar:

Go through the whole copying to a USB drive and dpkg-deb process to edit the DEBIAN/preinst again, and making a fixed version of the deb file and putting it back there.

Now run the update, and do the Ctrl-Z process again at a point I forget what:

Then do the update again. And it finally finished!

And now I’m in Xfce. On a 4.4.257 kernel.

Also, I wonder if I could have installed the Linux (Beta) feature so that I could have the dpkg-deb commands locally, and save the trip over a USB stick to another system.

I’m sure someone will whittle this down using these techniques and make the above steps look way too verbose in comparison. 🙂

(BTW, I first tried something even hackier by untar-ing and editing the deb files on the chromebook with vi and tar alone, but I wasn’t able to get them back in the ar format. This is hacking with just the default software on the chromebook. I suspect it’s doable, I just didn’t get there.)

(Also, if I had a newer BPF up and running, I’d be able to copy-out over the uname(2) return values and change the kernel versions that way. This is an ancient trick that predates eBPF.)

UPDATE: My chromebook just displayed a kernel version error and then blew up spraying fire and sparks everywhere, and ejected keys into the ceiling. Just kidding. 🙂 As I said, use at your own risk.

clrmntn42 commented May 17, 2021

There you’ll find the libc6 package. E.g., libc6_2.23-0ubuntu3_amd64.deb

Then do the update again. And it finally finished!

And now I’m in Xfce. On a 4.4.257 kernel.

Also, I wonder if I could have installed the Linux (Beta) feature so that I could have the dpkg-deb commands locally, and save the trip over a USB stick to another system.

I’m sure someone will whittle this down using these techniques and make the above steps look way too verbose in comparison. 🙂

(Also, if I had a newer BPF up and running, I’d be able to copy-out over the uname(2) return values and change the kernel versions that way. This is an ancient trick that predates eBPF.)

Excellent, I will try your idea out now on this RK3399 chromebook and report back! Cheers!

Источник

# Kernel Issues

Issues surrounding from initial booting the macOS installer to right before the install GUI pops up.

# Stuck on [EB|#LOG:EXITBS:START]

This section will be split into 3 parts, so pay close attention:

# Booter Issues

The main culprits to watch for in the Booter section are:

DevirtualiseMmio

SetupVirtualMap

EnableWriteUnprotector

Regarding MATs support, firmwares built against EDK 2018 will support this and many OEMs have even added support all the way back to Skylake laptops. Issue is it’s not always obvious if an OEM has updated the firmware, you can check the OpenCore logs whether yours supports it(See here how to get a log):

# Kernel Patch Issues

This section will be split between Intel and AMD users:

# AMD Users

# Intel Users

# Legacy Intel users

For macOS Big Sur, many firmwares have issues determining the CPU core count and thus will kernel panic too early for screen printing. Via serial, you can see the following panic:

However on certain machines like the HP Compaq DC 7900, the firmware will still panic so we need to force a CPU core count value. Only use the below patch if AvoidRuntimeDefrag didn’t work:

Legacy CPU Core patch

To do this, Add the following patch(replacing the 04 from B8 04 00 00 00 C3 with the amount of CPU threads your hardware supports):

Key	Type	Value
Base	String	_acpi_count_enabled_logical_processors
Count	Integer	1
Enabled	Boolean	True
Find	Data
Identifier	String	Kernel
Limit	Integer	0
Mask	Data
MaxKernel	String
MinKernel	String	20.0.0
Replace	Data	B804000000C3
ReplaceMask	Data
Skip	Integer	0

# UEFI Issues

# Stuck on EndRandomSeed

Same issues above, see here for more details: Stuck on [EB|#LOG:EXITBS:START]

# Stuck after selecting macOS partition in OpenCore

Same issues above, see here for more details: Stuck on [EB|#LOG:EXITBS:START]

# Kernel Panic on Invalid frame pointer

Another issue may be that macOS is conflicting with the write protection from CR0 register, to resolve this we have 2 options:

Note: 1 means it supports MATs, while 0 means it does not.

# Stuck on [EB|LD:OFS] Err(0xE) when booting preboot volume

This can happen when the preboot volume isn’t properly updated, to fix this you’ll need to boot into recovery and repair it:

Then finally reboot

This is due to missing outdated Apple Secure Boot manifests present on your preboot volume resulting is a failure to load if you have SecureBootModel set, reason for these files being missing is actually a bug in macOS.

To resolve this you can do one of the following:

To do this via terminal:

This is due to incorrect BIOS settings:

# Stuck on Buffer Too Small

# Stuck on Plist only kext has CFBundleExecutable key

Missing or incorrect Executable path in your config.plist, this should be resolved by re-running ProperTree’s snapshot tool(Cmd/Ctrl+R).

# Stuck on This version of Mac OS X is not supported: Reason Mac.

This error happens when SMBIOS is one no longer supported by that version of macOS, make sure values are set in PlatformInfo->Generic with Automatic enabled. For a full list of supported SMBIOS and their OSes, see here: Choosing the right SMBIOS

# Couldn’t allocate runtime area errors

Well this general area is where a lot of PCI devices are first setup and configured, and is where most booting issues will happen. Other names include:

The main places to check:

Missing EC patch:

IRQ conflict:

PCI allocation issue:

NVMe or SATA issue:

NVRAM Failing:

(opens new window) on how to stop NVRAM write, note that for install you do not need to run the script. Just setup the config.plist

RTC Missing:

Example of what a disabled RTC with no way to enable looks like(note that there is no value to re-enable it like STAS ):

# Stuck at ACPI table loading on B550

If you’re getting stuck at or near ACPI table loading with an AMD B550 or A520 motherboard, add the following SSDT:

# «Waiting for Root Device» or Prohibited Sign error

This is generally seen as a USB or SATA error, couple ways to fix:

# USB Issues

This assumes you’re only booting the installer USB and not macOS itself.

If you’re hitting the 15 port limit, you can temporarily get around this with XhciPortLimit but for long term use, we recommend making a USBmap

Another issue can be that certain firmware won’t pass USB ownership to macOS

Sometimes, if the USB is plugged into a 3.x port, plugging it into a 2.0 port can fix this error.

For AMD’s 15h and 16h CPUs, you may need to add the following:

If XLNCUSBFix still doesn’t work, then try the following:

X299 Users: Enable Above4G Decoding

Missing USB ports in ACPI:

# SATA Issues

On rare occasions(mainly laptops), the SATA controller isn’t officially supported by macOS. To resolve this, we’ll want to do a few things:

Note that you will only experience this issue after installing macOS onto the drive, booting the macOS installer will not error out due to SATA issues.

# Kernel panic with IOPCIFamily on X99

For those running the X99 platform from Intel, please go over the following:

# Stuck on or near IOConsoleUsers: gIOScreenLock. / gIOLockState (3.

This is right before the GPU is properly initialized, verify the following:

# Scrambled Screen on laptops

Enable CSM in your UEFI settings. This may appear as «Boot legacy ROMs» or other legacy setting.

# Black screen after IOConsoleUsers: gIOScreenLock. on Navi

For MSI Navi users, you’ll need to apply the patch mentioned here: Installer not working with 5700XT #901

Note: macOS 11, Big Sur no longer requires this patch for MSI Navi.

# Kernel Panic Cannot perform kext summary

Generally seen as an issue surrounding the prelinked kernel, specifically that macOS is having a hard time interpreting the ones we injected. Verify that:

Note: this error may also look very similar to Kernel Panic on Invalid frame pointer

# Kernel Panic AppleIntelMCEReporter

With macOS Catalina, dual socket support is broken, and a fun fact about AMD firmware is that some boards will actually report multiple socketed CPUs. To fix this, add AppleMCEReporterDisabler

# Kernel Panic AppleIntelCPUPowerManagement

Comment	String	Force HPET Online
Enabled	Boolean	YES
Count	Number	0
Limit	Number	0
Find	Data	A010934F53464C00
Replace	Data	A40A0FA3A3A3A3A3

# Kernel Panic AppleACPIPlatform in 10.13

On macOS 10.13, High Sierra the OS is much stricter with ACPI tables, specifically a bug with how headers were handled

# macOS frozen right before login

This is a common example of screwed up TSC, for most system add CpuTscSync

The most common way to see the TSC issue:

Case 1	Case 2

# Keyboard works but trackpad does not

Make sure that VoodooInput is listed before VoodooPS2 and VoodooI2C kexts in your config.plist.

# kextd stall[0]: AppleACPICPU

This is due to either a missing SMC emulator or broken one, make sure of the following:

# Kernel Panic on AppleIntelI210Ethernet

For those running Comet lake motherboards with the I225-V NIC, you may experience a kernel panic on boot due to the I210 kext. To resolve this, make sure you have the correct PciRoot for your Ethernet. This commonly being either:

For those who can to your PciRoot manually, you’ll want to install macOS fully and run the following with gfxutil

This should spit out something like this:

The ending PciRoot(0x0)/Pci(0x1F,0x6) is what you want to add in your config.plist with device-id of F2150000

# Kernel panic on «Wrong CD Clock Frequency» with Icelake laptop

# Kernel panic on «cckprng_int_gen»

This is likely to be 1 of 2 things:

For the latter, ensure you’re only using SSDT-CPUR with B550 and A520. Do not use on X570 or older hardware(ie. B450 or A320)

# Stuck at Forcing CS_RUNTIME for entitlement in Big Sur

This is actually the part at where macOS will seal the system volume, and where it may seem that macOS has gotten stuck. DO NOT RESTART thinking you’re stuck, this will take quite some time to complete.

# Stuck on ramrod (^^^^^^^^^^^^^)

If you get stuck around the ramrod section (specifically, it boots, hits this error, and reboots again back into this, causing a loop), this hints that your SMC emulator is broken. To fix this, you have 2 options:

(opens new window) (you can use the MinKernel / MaxKernel trick mentioned above to restrict FakeSMC to Big Sur and up

And when switching kexts, ensure you don’t have both FakeSMC and VirtualSMC enabled in your config.plist, as this will cause a conflict.

# Virtual Machine Issues

# Reboot on «AppleUSBHostPort::createDevice: failed to create device» on macOS 11.3+

Источник

Сначала обновим версию Java.

Теперь нужно переустановить драйвер видеокарты.

0 Before you do anything about Krnl check that you have the requirements.

Krnl needs these programs/software to function properly

1 Issues about downloading/opening krnl:

1.1 Download blocked by browser

1.2 Antivirus blocking downloading/running Krnl

Why this happens

SKIP THIS STEP IF YOU DONT HAVE A 3RD PARTY ANTIVIRUS

1.3 Bootstrapper/Downloader issues

If the official Krnl bootstrapper from krnl.gg doesnt work for you for any reason even after you excluded it from Windows Defender here are some things you can try:

First way: Download from wearedevs.net

Second way: Downloading and extracting the Krnl zip/rar version from their discord server.

2- Issues about injecting/executing:

2.1 Unknown error/crashing when injecting

2.2 Krnl is getting stuck at saying «Injecting»

2.3 Roblox Process not found error

2.4 krnl.dll missing issue

2.5 Executing crashes Roblox

This issue is caused by

TLDR: Find a different script

2.6 Stuck at waiting for roblox

2.7 You are using an outdated version of Krnl

3- Issues about keys

First let’s talk about how to get a key in the first place and how they work.

3.1 Key invalid

3.2 Stuck at checking key

4 Miscellaneous Issues

«Send «error.txt» to the krnl server»

How To Fix Krnl Outdated

Related Searches

Travel

Travel

Travel

Travel

Travel

FIX KRNL ERR FAILED TO CONFIRM IF KRNL …

Travel

How do i update krnl? : robloxhackers

Travel

MOST FIXES FOR COMMON KRNL PROBLEMS : ROBLOXExploiting

Travel

Travel

Outdated version : Krnl

Travel

Travel

Travel

pls help even if i update it it does not work pls help : Krnl

Travel

Travel

Travel

Fix, Download, and Update Krnl386.exe

Travel

Travel

Krnl Update 2021 : How To Get Key KRNL Exploit 2021 | Видео

Travel

Travel

Travel

Why is my version of KRNL is outdated?

Why do I get an error when trying to inject KRNL?

What to do if bootstrapper doesn’t update KRNL?

How to fix KRNL issues in Chromium browser?

crouton on x86_64 *and* arm, kernel version issue with libc updating in chroot #4429

Comments

clrmntn42 commented Mar 5, 2021

Please describe your issue:

If known, describe the steps to reproduce the issue:

DennisLfromGA commented Apr 13, 2021

brendangregg commented May 5, 2021

brendangregg commented May 5, 2021

brendangregg commented May 5, 2021

clrmntn42 commented May 17, 2021

# Kernel Issues

# Stuck on [EB|#LOG:EXITBS:START]

# Booter Issues

# Kernel Patch Issues

# AMD Users

# Intel Users

# Legacy Intel users

# UEFI Issues

**crouton on x86_64 and arm, kernel version issue with libc updating in chroot #4429**